How to use a KEYTIS io with a Lock Controller io?

Profile: Door lock with locking and unlocking

• Pressing the lock control button locks (output 2) or unlocks (outputs 1 and 3) the lock, depending on the last action performed. Pressing the button again triggers the next action (unlocking or locking). In both cases, the LED flashes briefly.
• Within 30 seconds after the locking and unlocking operations, the LED of the KEYTIS io flashes green (action completed) or red (action not completed). Only possible if the open/close or lock sensors are present:

Profile: Door lock with unlocking only

• Pressing the dedicated button unlocks the lock, outputs 1 and 3 are activated. The LED flashes briefly and a “beep” is heard.
• When closing the door, the lock locks automatically. Pressing the dedicated button again unlocks the lock.