How to configure the Thermal Comfort scene?

Identify & configure the most exposed façade.​ ​

Is there a indoor temperature sensor or a outdoor brightness sensor you want to associate to this façade?​ ​

• A: For installation without sensors, choose ‘no sensor’​
• B: For installation with a light sensor, select one of them​
• C: For installation with a temperature sensor, select one of them​ (the other façades can be configured later)​

See the list of compatible sensors: Which sensors can I use with the comfort thermal scene?

5 modes of protection are avaible to find the right balance between thermal efficiency and light confort during summer period.​ ​

• With the slider, choose the level of protection ​

By default the level 4 is selected.​

• The last level will be the most restrictive in terms of light and also the most thermally efficient.​
• The first level will be the least restrictive in terms of light and also the least thermally efficient.

​

Select the device on the same façade that will be controlled:

• A: your facade is configured! You can also set up your other façades now or come back to them later
• B: Here is the summary of your scene.

From the summary of your scene:​ ​

A: Select the façade you want to customize​ ​

B: Select the season you want to customize:​

• Summer​
• Winter & Mid season ​

C: For a quick customization, you can adjust the protection level​ with the slider

Or you can access to the advanced settings

To access advanced settings:​

• A: Choose action you want to customize: Position1, Position 2, etc.
• B: Then choose the parameters you want to customize

You can customize:

• A: Light thershold (your installation has sun sensors)​
• B: Temperature thershold (your installation has indoor temperature sensors)​
• C: Time slots​
• D: Percentage of opening / closing of devices

You must manually select the season if you want to switch from the summer program to the winter & mid season program.