How to add the motorized gate to the memory of the V®500 Connect RTS?

Valid for:

• Evolvia
• Lockyvia
• SGA
• Exavia
• Slidymoove
• Freevia

1. Creating the radio control on the monitor interface

1. From the home screen, press the "HOME" button then the "+" on the middle of the screen.
2. Select the swinging or sliding gate icon (depending on your gate), the desired channel and then "CONTINUE".
3. Name the channel (max. 7 characters).
4. Do not follow the instructions display on the screen and press directly on “SAVE” and “CONTINUE” then “OK” .

2. Saving the gate motorisation in the monitor’s memory

1. Place the monitor (with power supply) next to the gate motorisation
2. Open the motorisation cover to have access to the electronic board
3. If no LED is ON, press the "POWER" button for 2 seconds.
4. Open the command interface of your monitor by pressin "HOME" button.
5. Place the upper right-hand corner of the monitor on the target draws on the electronic board.
6. Briefly press the opening button
7. The "RADIO" indicator on the electronic board is lit then goes out.

The gate opener is now saved in the V500 RTS memory! You can control the opening and closing of your gate using the wireless control.