1. Unhook the indoor monitor from its mounting wall by pulling it upwards.
2. Leave the mounting wall in place.
3. Memorize or take a photo of the connection on the back of the monitor, in order to locate the power cables (DC 24V terminal block) and the outdoor panel (CS/Call station terminal block).
4. Without unscrewing the blue cable connectors , unplug all the connectors present to release the monitor.
If you have a second monitor, it is not compatible with the connectivity module. It will no longer be possible to answer to a visitor's call. However, you can continue to use it to control Somfy equipment via radio (RTS/io) and launch TaHoma® scenarios (VR500 PRO io monitor only).
5. Identify the 2 power wires connected to the DC 24V terminal block, noting the polarity (+ and -) and identify the 2 wires from the door panel connected to the CS/Call station terminal block. Polarity does not matter.
6. Use the screwdriver provided to unscrew the blue connectors from the identified cables. These will no longer be used.